How Long Does Asphalt Need to Dry Before Driving on It?

Posted on: July 23, 2022

When is the best time to drive on an asphalt driveway? The answer depends on several factors, including air flow, Temperature, Humidity, and the type of asphalt. It can take months or even years to completely dry out. During this time, the asphalt may crack and other signs of deterioration will appear. Then, you can safely drive on it. After the asphalt has dried, you can apply a coat of sealant to prevent cracks from developing.


The temperature of asphalt before driving on it is extremely important for the durability of a road. If the asphalt is poured too hot, it can damage the binders and affect the overall durability of the road. Additionally, raising the temperature reduces the production efficiency, reducing its lifespan. The highest temperatures for asphalt are found in late spring, summer, and early fall. Nevertheless, any time is suitable for installing asphalt, so long as temperatures are at the proper range.

When temperatures outdoors reach 120 degrees Fahrenheit or more, the asphalt can start to melt and may not be safe to drive on. As asphalt holds heat, it is essential to maintain the proper viscosity of 250-325 degrees Fahrenheit before driving on it. Failure to adhere to this temperature can delay installation or repair. In addition, the asphalt will not hold the proper amount of heat, causing it to become fragile and prone to damage.


When paving a new driveway, asphalt must dry before it can be driven on. Temperature and humidity both play a role. The higher the humidity, the longer it takes for the asphalt to dry. However, the longer the temperature remains low, the faster the asphalt will dry. The humidity is also a factor when applying paints and sealers. High humidity can inhibit the evaporation of water molecules in asphalt.

To avoid damage, wait for at least 24 hours after laying asphalt. You can walk on the newly laid asphalt the next day, as long as it is not humid or hot. If you’d like to be more careful, wait 48 or 72 hours. This process can take longer during hot, humid, or rainy weather, so be patient. It will be safe to drive on asphalt in a few days if it is dry enough.

Air flow

You probably have heard of the term “drying asphalt” and are wondering what that means. Asphalt requires some time before it is completely dry, but that time can vary from a few days to several months. In most cases, it should be dry enough to drive on in just a few hours. However, if it’s been resurfaced, then you should wait until the dry pavement is at least 48 hours old before driving on it.

During the initial drying process, the asphalt must be as close to the ambient temperature as possible. High humidity delays the drying process, and it’s important to avoid asphalt resurfacing during hot or humid weather. In fact, asphalt can’t fully dry if it’s too humid or too cold. In either case, you’ll have to wait even longer to drive on it. You can speed up the drying process by spraying it with water. However, you should avoid paving in extreme weather conditions, as the asphalt will become very hard and lumpy.

Parking spot

After the asphalt has been poured, it should be dry enough to drive on within 24 hours. Generally, asphalt needs about a year to fully cure before it reaches its full strength. During the curing process, a parking lot can still be used, but traffic should be avoided to prevent damage to the new surface and prevent tire marks. However, this time frame may be extended in warm or humid climates.

The time required for asphalt to dry varies, ranging from several weeks to several months. This time span is determined by the amount of moisture present in the air and surface. High humidity is less absorbent, and it can lengthen the time it takes for asphalt to dry. Additionally, high humidity affects the performance of paint and sealants. High temperatures will increase the drying time of asphalt, but will also cause faster evaporation and premature fading.


To prevent ruts and tire marks, asphalt must be completely dry before driving on it. If the asphalt is not thoroughly dry before driving, it can freeze and crack, causing problems later. To speed up the drying process, apply a sealcoat. However, be sure to follow all directions carefully, including the ones for driving safely on wet asphalt. If you don’t have the time to wait for the asphalt to completely dry, you may experience more problems.

The answer to the question “How long does asphalt need to dry before driving on? ” depends on two factors: humidity and temperature. The higher the humidity, the slower the drying process will be. Avoid applying paint or sealers to asphalt if it is too humid. And the higher the temperature, the faster the evaporation process will occur. In cold climates, heat lamps may speed up the drying process, but traffic on freshly laid asphalt shouldn’t be walked on. This could cause tire marks and damage to the new surface.